Home ยป Guides ยป Diablo 4 Guides ยป Diablo 4 Werebear Druid Build – Pulverizer

Diablo 4 Werebear Druid Build – Pulverizer

Diablo 4 Werebear Druid Build โ€“ Pulverizer โ€“ In this Diablo 4 Build Guide Iโ€™ll show you how to play my Pulverizing Werebear Build, which is a tanky melee focused Diablo 4 Druid Build that uses Pulverize to decimate enemies in one Overpowered swing, as well as other Werebear Skills in order to pound enemies to a pulp! This Build is aimed at Tiers 1 & 2 of the game, and is a beginner Diablo 4 Werebear Druid Build that shows you the basics.

  • If you’re looking for a more advanced version of this Diablo 4 Werebear Druid Build, check out the Permabear Build, which is a level 50+ Build aimed at World Tier 3.

Also, be sure to check out our Diablo 4 Wiki and Interactive Map if you need help finding specific Altars of Lilith, Dungeons, or Side Quests!

Diablo 4 Werebear Druid Build – Pulverizer

The general strategy for this Diablo 4 Werebear Druid Leveling Build is to lead off with an Overpowered Pulverize often wiping out an entire pack of enemies in one swing or close to it, or using Poison Creeper to root enemies and then Pulverizing them. Pulverize can Overpower every 12 seconds as long as your HP is over 80%, so you’ll need to ensure you have high Max Life, and you’ll need to mitigate damage and heal with Potions as needed.

Diablo 4 Werebear Druid Build - Enhanced Pulverize

Overpower damage is extra damage equal to the sum of the playerโ€™s current and Fortified Life, and has a native 3% chance to occur naturally when attacking, but can be increased. Because Enhanced Pulverize does this guaranteed if youโ€™re over 80% HP once every 12 seconds, this is particularly deadly, and synergizes well with how Overpower works, since you need high HP to get the most out of it anyway. But if youโ€™re wondering why you see Overpower (blue numbers) damage some times when not using Pulverize, this is why.

But this is not the only way we get Overpower damage from this Build, in fact there are a few. Another way is by using the Obsidian Slam Spirit Boon in conjunction with the Legendary Aspect: Aspect of the Ursine Horror, which not only makes your Pulverize deal damage over time after it is used, but also converts it to an Earth Skill which makes this Spirit Boon apply to it. You need only defeat 10 enemies before using Pulverize to get this to trigger, and often times you will Overpower and kill 10 enemies in one swing, which will result in an immediate second Overpower.

Diablo 4 Werebear Druid Build - Obsidian Slam

The last is by using Provocation, which allows you to Overpower every 20 seconds if you’ve remained in Werebear form for 20 seconds. This is not easy to do, but not impossible either, as the timer does stop for a few seconds if you return to human form, so you do have some leeway before it is wiped entirely. You can also simply swing with Maul to keep yourself in Werebear form if necessary.

Diablo 4 Werebear Druid Build - Provocation

Maintaining close to max HP is vital for this Build because thatโ€™s how youโ€™re going to get Overpowered Pulverize attacks regularly, which drastically boost its damage so there is also a big focus on mitigating damage through resistances and Fortify, which subsequently boosts Overpower damage anyway. Ursine Strength also boosts your damage by 30% while over 80% HP, so you get the idea…

Diablo 4 Werebear Druid Leveling Build – Pulverizer

Each Diablo 4 Werebear Druid Build is made up of the 6 Active Skills they have equipped and changing these Skills can drastically change the way a Diablo 4 Druid Build plays. In this section weโ€™ll take a look at what Skills you should slot for the Pulverizing Werebear Diablo 4 Build. Your Skill distribution should look something like this:

LEVEL 25 WERBEAR DRUID SKILLS
SkillPoints Spent
 Maul 1
 Enhanced Maul 1
 Fierce Maul 1
 Pulverize 5
 Enhanced Pulverize 1
 Primal Pulverize 1
 Predatory Instinct 2
 Iron Fur 3
 Debilitating Roar 1
 Enhanced Debilitating Roar 1
 Preserving Debilitating Roar 1
 Poison Creeper 1
 Enhanced Poison Creeper 1
 Brutal Poison Creeper 1
 Trample 1
 Enhanced Trample 1
 Savage Trample 1
 Grizzly Rage 1
 Prime Grizzly Rage 1

The above list gives you the general order to invest in Skills, but keep in mind that you should prioritize picking up new Skills over investing in passives, so pick up passives later if you can get new Skills when you level up.

How to Handle Packs of Enemies

The strategy for handling enemies is a bit different than Bosses, but Iโ€™ll get into that in just a second. First letโ€™s talk about Pulverize, the namesake of this Diablo 4 Werebear Druid Build, and why itโ€™s so important.

Pulverize

The idea when handling groups of enemies is that you lead off with an Overpowered Pulverize if you have the Spirit already built up. Because we have the Enhanced Pulverize passive, Pulverize will hit like an absolute freight train once every 12 seconds as long as we maintain over 80% max HP during that time. This often one shots just about every normal enemy and below, and severely weakens anything else thatโ€™s still alive, and this effect should be off โ€œcooldownโ€ on just about every pull.

Diablo 4 Werebear Druid Build - Pulverize

However, if you drop below 80% HP at any time during the cooldown for this effect, it will stop cooling down and wonโ€™t begin again until you are over 80% HP. This makes it vital to stay above 80% HP as much as possible, and why Max Life, Fortify and Barriers are great for this Diablo 4 Werebear Druid Leveling Build, so that you can get the mega damage from this every 12 seconds without interruption. So make sure to keep an eye on your Health!

Maul

Maul is your Basic Attack Spirit generator and youโ€™ll use this when you donโ€™t have enough Spirit to use Pulverize. It hits in a cone in front of you, so aim for the center of groups of enemies. It has an extremely slow Attack Speed, so I highly recommend using the Rapid Aspect with this Build in order to attack more quickly when using this Skill, otherwise it tends to feel a bit sluggish. You will need to use it in order to generate Spirit, so either be ok with slower Attack Speed, or use this Aspect.

Diablo 4 Werebear Druid Build - Maul

You can upgrade this with Enhanced Maul and Wild Maul that will Knock Down enemies every so often, which is a great defensive play. Knocking Down Elites prevents them from damaging you, and you can even deal more damage against them if you have Damage vs. Crowd Controlled enemies.

Poison Creeper

When facing large groups of enemies with this Diablo 4 Werebear Druid Leveling Build, that Pulverize just wonโ€™t reach all of, Poison Creeper is the answer. Lead off with this to Immobilize enemies and Poison them simultaneously. This skill is hands down one of the best Druid Skills in Diablo 4 and just about every Diablo IV Druid Build should be running it!

Diablo 4 Werebear Druid Build - Poison Creeper

Once youโ€™ve cast Poison Creeper run in and Pulverize as close to the center of the group as you can, or begin attacking with Maul to build Spirit and then use Pulverize if you donโ€™t have enough Spirit to use Pulverize first. This will pull you out of Werebear form momentarily but you will get right back in and the timer will continue to tick towards 20 seconds for Provocation so it’s not a big deal.

The Brutal Poison Creeper upgrade also increases your Crit Chance against entangled enemies by 20%, so I suggest taking it. Overpowered attacks can still Crit for even more damage, and you’ll see these as bright orange numbers!

Debilitating Roar

This skill reduces the damage nearby enemies deal by 70% for 4 seconds, and is great for large trash pulls of enemies with Elites where you might be in a bad spot if you don’t use it. Once you’ve upgraded it with Enhanced Debilitating Roar then it will also give you a good amount of Fortify, which will help increase your Overpower damage.

Trample

Trample is both great at AoE and focus damage, and excels at defeating Elites and packs of enemies alike, particularly when Overpowered by Provocation. It’s your hardest hitting Druid Skill and you’ll want to try to use it to run enemies into walls for maximum damage. This will leave them Stunned, allowing you to go to town on them without fear of retaliation.

Once you have the Savage Trample upgrade this will provide you with 20 Spirit on use, which is excellent since you will have to use Maul a lot with this Diablo 4 Werebear Druid Build, and this allows you to use it a little less often.

Boss Fights

Boss fights are not the fastest with this Build since it’s a tanky Diablo 4 Druid Build, but you have relatively high surviveability from things like: Iron Fur, Ursine Strength, Wariness, Iron Feather, and Bolster. There are more passives you can take later as well, but you likely won’t until you get higher levels simply due to lack of Skill Points.

Grizzly Rage

This Skill increases your damage and damage reduction by 20%, increasing your damage each second you remain in its form, as well as extending its duration for each kill by 1 second by up to 10 seconds. This skill is a great way to further mitigate damage during Boss encounters, but it also works well in groups of enemies as well where you can extend its duration.

Enhanced Grizzly Rage makes you Unstoppable for its duration, which is phenomenal as this means you cannot be Crowd Controlled whatsoever while it is active. You will use this when facing elites and challenging Bosses a lot, and the final upgrade, Supreme Grizzly Rage gives you Fortify every second its active, helping to prevent even more damage while simultaneously making your Overpower stronger.

Final Tips

Bonuses you want to look for are Critical Strike ChanceOverpower DamageDamage to Close EnemiesDamage to Healthy EnemiesWillpowerLife on Kill. Overpower Damage is huge for this Build because we take advantage of it constantly with our Overpowered Pulverize attack, so you really canโ€™t get this too high. Maces come with this by default so either look for a one-handed or two-handed Mace if possible.

Remember that you can swing Maul over and over to stay in Werebear form if there are no enemies to kill. This will help keep your Provocation passive active.


Be sure to check out our Diablo 4 Wiki for any other questions you have about the game and the Builds page if you are looking for more Diablo IV Builds, as well as our Ultimate Beginner Guide and Best Class to Play Guide if you are looking for more Diablo 4 content!

About the Author

Games

Comments

Log in to leave a Comment

Latest from Fextralife